Product Highlights
- Complete Integrated Scissor Lift Control System
- 7.2 KW Pump Motor Controller
- High I/O count and CANbus expandable
- Configurable for a wide variety of functions including EN280 compliance.
- Integrated tilt sensor can be configured to limit or prevent selected functions when vehicle is tilted
- Platform overload can be configured for EN280 compliance (requires pressure sensor and Dual EZfit height sensor
- Flash memory allows factory configuration to exact vehicle needs
- Inputs from platform joystick & switches (or ground mode emergency switches) control vehicle functions via protected valve & line contactor drivers
- Inputs from various cutout switches can be configured to limit or prevent selected functions depending on vehicle state.
- Dual micro-controller ensures failsafe operation
- Available EZcal hand-held allows access to configuration settings and diagnostics including history log (via RS232)
- All inputs & outputs can be tested with EZcal to identify wiring errors
- Integral status LED provides (flashing) fault code indication
Optional: Text display module provides end-user status & fault descriptions to minimize down time
Technical Data:
| Power Supply | 24V | 8.5 to 33 Vdc |
| Continuous current | 300A | |
| Peak current | 500A | |
| PWM Frequency | 15Khz | |
| Integral Tilt Sensor | +/- 0 to 10° | √(x2+y2) |
| High Side Output | 8 | 3A |
| PWM Output (high side) | 4 | 3A |
| Indicator outputs low side | 6 | 2A |
| Power output low side | 1 | 4A |
| Digital Inputs | 24 | 1.25KW |
| Analog inputs | 6 | 0-5 Vdc |
| Water Proof | IP 67 | |
| Ambient Working Temperature | -40 + 50°C | |
| Overall Dimensions | 7.09” x 5.4” x 2.7” | |
| 180 x 137 x 68 mm | ||