GP107 Overload System

Product Highlights

The GP107 control module is designed to prevent vehicle movement when platform overload is detected. The module interfaces with two or four strain gauge/ load cell transducers to measure the load of the work platform.

The GP107 can also be used for measuring the load on the forks of a telescopic handler to prevent vehicle tipping.

  • Provides cutout signal when overloaded (per EN 280 5.4.1.2a) using 1 or more load cell (basket rotator ring, load pins, Cantilever/ Shear Beam or Strain Gauges)
  • Configurable lamp & alarm output (per EN 280 5.4.1.2b)
  • Overload cutout can be disabled when driving, steering, etc to avoid nuisance shutdowns
  • Interlocks (subject to installation, per EN 280 5.4.1.2c and EN 280 5.7.7)
  • RS232 connection to hand-held “EZcal” for calibration and diagnostics

Technical Data:

Power Supply 12/24V
Failsafe High Side Cutout Output,
protected, 2.5A
1
High side Indicator Output, protected
1A
3
Integral Tilt Sensor ± 0 to 10°
Digital Inputs 8
Analog Inputs 2
Diff. Analog Inputs 4
Sealing IP67
Operating Temperature -40 + 60° C
Overall Dimensions, L x W x H 7.3” x 4.5” x 1.5”
185 x 115 x 39 mm