Trionic SEM300

Product Highlights

The SEM300 is an integrated vehicle management, drive and pump motor controller commonly used in Electric Drive Slab Scissor applications.

  • 24V Sepex Traction and DC Pump motor and vehicle controller
  • Tilt sensor and overload system
  • EN280 Compliant

General features

  • Integrated dual Sepex Traction motor and DC Pump motor controller
  • Integrated tilt sensor can be configured to limit or prevent selected functions when vehicle is tilted
  • Platform overload can be configured for EN280 compliance (requires pressure sensor and height sensor [EZfit])
  • Flash memory allows factory configuration to exact vehicle needs
  • Inputs from platform joystick & switches (or ground mode emergency switches) control vehicle functions via protected valve & line contactor drivers
  • Inputs from various cutout switches can be configured to limit or prevent selected functions depending on vehicle state.
  • Dual micro-controller ensures failsafe operation
  • Available EZcal hand-held allows access to configuration settings and diagnostics including history log (via RS232)
  • CAN bus
  • Integral status LED provides (flashing) fault code indication

Optional: Text display module provides end-user status & fault descriptions to minimize down time

Technical Data

Power Supply 24V 16 to 33 Vdc
Drive motor current200A 
Pump current300A 
PWM Frequency16Khz 
Integral tilt sensor+/- 0 to 10°√(x2+y2)
Safe High Side
ON/OFF Output
Safe High Side Proportional outputs43A
High side
ON/OFF outputs
Digital Inputs191.25kΩ imp.
Analog inputs70-5 VdC
Power output low side14A
Water proofIP 65 
Working Temperature 

-40 +50°C 

Overall Dimensions

8.12” x 6.11” x 2.7”

206 x 155 x 68 mm

Trionic GPC442 Canbus I/O